PSX ONE quick reference

Thinner	Amercoat 911
Equipment cleaner	Thinner or Amercoat 12

Theoretical Coverage	ft²/gal	m²/L
1 mil (25 microns)	1203	29.6
2 mils (50 microns)	601	14.8
VOC	lb/gal	g/L
	1.75	210
Flash point (SETA)	°F	°C
PSX 1001	70	21
Amercoat 911	81	27
Amercoat 12	2	-17

Application Data
Environmental conditions
Temperature	°F	°C
Air	40 - 110	4 - 43
Surface	40 - 120	4 - 43
Relative humidity	20% to 90%
Surface temperatures must be at least 5°F (3°C) above dew point to prevent condensation.

Drying time (hours) °F/ °C	90/32	70/21	50/10
Touch	1	2	3
Through	5	9	16
Recoat	90/32	70/21	50/10
minimum (hours)	1	2	5
maximum	30 Days

Application Procedure Flush all equipment with Amercoat 911 or Amercoat 12 before use. Mix to a uniform consistency. If needed forworkability, thin with Amercoat 911 up to 1.2 pint per gallon. Apply a wet coat in even, parallel passes, overlap each pass 50 percent to avoid holidays, bare areas and pinholes. If required, follow with a cross spray at right angles to first pass. Clean all equipmentwith Amercoat 911 or Amercoat 12immediately after use. Temperature Resistance (Dry) °F °C continuous 200 93 intermittent 250 121 See temperature limits for primer or coating used as first coat.

Full Product Data Sheets

Return to quick reference index

Return to C.G. Edwards Homepage