C.G.Edwards & Co.Inc.
272 Dorchester Ave, P.O.Box 358 Boston, MA 02127 Phone: (617)268-4111-4112 * Fax:617-268-8845 E-mailwebsales@cgedwards.com |
Water Lubricated Standard Rubber Sleeve Bearings Johnson Cutless rubber-lined Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder stock and pintle bushings. Bearing diameters are precission fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press fitting and locked in place with cone pointed set screws. Precaution:When Shrink fitting of the bearing is required, Chilling must be achieved by gradual cooling to not more than minus 20°F (-28°C) using freezer or regular Ice.
Johnson Cutless Naval Brass Sleeve Bearings meet
If you would like a price quotation on any of these items, please fill out the form at the bottom of the page |
|
|
If you would like a price quote on any of these items, please fill out the form below
If you would like to check the status of an order,
All Images and logo's on this website are copyrighted and may not be reproduced without permission
Click here
Contact C.G. Edwards
Return to C.G. Edwards Homepage
This site last updated September 21, 2003