C.G.Edwards & Co.Inc.

272 Dorchester Ave, P.O.Box 358
Boston, MA 02127
Phone: (617)268-4111-4112 * Fax:617-268-8845
E-mail: websales@cgedwards.com

 

Garelick Marine Products

Table Pedestals for Back Decks, Salons and Pontoons

 

White Polymer Table with Stowable Pedestal
  • Provides salon areas and pontoon deck with removable dinette table
    (Includes two recessed cup holders. 3" (8cm) Dia.)
  • Complete table 28" x 15" (71 x 38cm) with pedestal
  • 7" (19cm) diameter cast aluminum base on each end
  • Anodized finish to resist saltwater corrosion

SPECIFICATIONS :
30" (76cm) Height, Fluted Anodized Tube, 2.25" (5.75cm) Diameter

    99193 : 2.25" (6cm) storage mounting brackets
  • Mount to side coaming or transom for storing table pedestals
  • High density black delrin

75349 Deluxe Table Pedestal with Top $239.95
 


Side Mount Table Leg System
  • Allows installation of table system to any vertical surface (coaming)
  • Consists of mounting bracket, angled table leg and oval acrylic-coated ABS plastic table top with two recessed cup holders
  • Table leg removes from side mount bracket and table top removes from table leg for stowing when not in use
  • Spring loaded locking pin holds table leg in place

SPECIFICATIONS :
Table Top:   18" x 30" oval acrylic coated ABS white table top.
Stanchion Tube and Bracket:   Fluted 2.25" (6cm) diameter anodized tube 25" (64cm) height.
Anodized wall bracket 5" H x 4.75" W x 2.56" D (15 x 12 x 6.5 cm)
 
75337 Side Mount Table, Stainless Steel with Oval Top
Stainless Steel table leg is 2.25" diameter stainless steel with 18" x 30" oval, acrylic coated ABS table top.
When mounted table leg extends out 16.5" from vertical surface.
Table leg height is 19.25" .
Installed height of table will be 16", plus distance from deck to mounting bracket location plus thickness of table top.
$289.95
75359 Side Mount Table, Aluminum with Oval Top
Anodized aluminum table leg with 18" x 30" oval acrylic coated ABS table top.
$359.95
 


Quick Release Table Pedestal System
  • Patented, revolutionary table hardware system
  • Quick release levers allows effortless take-down of table system for storage
  • Simple to use, simple to install.
  • Low-Profile deck ring creates minimal interference when table is stowed
  • No large center hole in deck as is common with other table hardware systems
  • Marine grade polymer components resist corrosion
  • 2 ¼" ribbed Anodized aluminum stanchion is tapered at both ends
  • 9 ¼" and 13" stanchion posts ava ilable for converting dinette into bunk use
  • Individual components available if additional mounting locations are desired

 
75640 Complete system includes: deck ring, socket base, table mounting socket, 25.5" stanchion tube $89.99
 


"Build your own" 2.875" table hardware system
  • Tapered socket design for wobble free solid support
  • Table top support bracket- rotates 360° and locks
  • Fixed height or gas rise adjustable height options
  • Fluted profile 2 7/8" (7cm) diameter stanchion tube
  • Anodized finish to resist saltwater corrosion
75442 Table Top Mounting Bracket $139.95
75445 Tapered Gas Rise Stanch $146.95
75446 28in Stanchion 2 7/8in Diameter $55.95
99023 Spider Swivel Casting $36.95
  75355 Flush Mt. Taper Socket Base (order below) $50.95
  75356 Surface Mt. Taper Socket Base (order below) $50.95
 


Table pedestals for smaller boats
  • Provides salon areas and pontoon decks with removable dinette tables
  • Engineered for marine use
  • 3 piece, all-aluminum provides solid table base
  • Fluted profile stanchion with protective anodized finish
  • Quick stowage

**Flush mount bases require drilling into deck and extend 2.75" below deck
75340 Flush Mount Base with Fluted Anodized Tube, complete 3-piece set $119.95
75341 Surface Mount Base with Fluted Anodized Tube, complete 3-piece set $119.95
75343 13" Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Flush Mount) 2¼" dia. $20.95
75344 9¼" Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Surface Mount) 2¼" dia. $14.95
75345 Flush Mount Taper Socket Base $34.95
75346 Surface Mount Taper Socket Base $34.95
75347 Fluted Taper Stanchion Post only (Flush Mount) 30" $21.95
75348 Fluted Taper Stanchion Post ONLY (Surface Mount) 28¾" $31.95
 


Table pedestals for smaller boats
  • Provides salon areas and pontoon decks with removable dinette tables
  • Engineered for marine use
  • 3 piece, all-aluminum provides solid table base
  • Fluted profile stanchion with protective anodized finish
  • Quick stowage

**Flush mount bases require drilling into deck and extend 2.75" below deck
75350 Flush Mount Base with Fluted Anodized Tube, complete 3-piece set $159.95
75351 Surface Mount Base with Fluted Anodized Tube, complete 3-piece set $149.95
75373 13" Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Flush Mount) 2 7/8in dia. $30.95
75374 9 1/4"Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Surface Mount),2 7/8in dia. $21.95
75355 Flush Mount taper Socket Base Only $50.95
75356 Surface Mount taper Socket Base Only $50.95
75357 Fluted Taper Stanchion Post ONLY (Flush Mount) 30" $50.95
75358 Fluted Taper Stanchion Post ONLY (Surface Mount) 28 3/4" $50.95
 
Adjustable Table Pedestals
Adjustable Table Base
Gas Rise or Manual

  • Converts dinettes to berths
  • 9"(23cm) diameter cast aluminum base on each end for support
  • Locks any height from 14.5" to 29.5" (37- 75cm)
  • 2.875" (7cm) smooth stanchion tube
  • In lower position inside tube goes below deck 6" (15cm)
75025 Adjustable Table Pedestal
Manual rise with smooth polished finish. 14.5" to 30.75" (37cm - 78cm). Protrudes 6" (15cm) below deck
$139.95
75225 Adj.Table Pedestal Anodized
Manual rise with smooth polished finish. 14.5" to 30.75" (37cm - 78cm). Protrudes 6" (15cm) below deck
$164.95
75325 Adj. Table Pedestal Anodized Ribbed
Manual rise with ribbed stanchion. 14.5" to 30.75" (37cm - 78cm). Protrudes 6" (15cm) below deck
$184.95
75425 Adj.Table Ped. Gas Rise (Ribbed)
Sealed gas-powered rise with ribbed stanchion. 14.5" to 29.5" (37cm - 75cm).
Protrudes 8.5" (22cm) below deck (63 lb. gas spring)
$329.95


Please Note:
With all the recent cases of on-line credit card and Identity theft,
we feel obliged to inform our customers that neither
C.G. Edwards Co Inc. or Boxell's Chandlery,
under any circumstance sell or divulge any personal information about our customers,
nor do we in any way store confidential information on our server.
Please be assured that we will continue to do everything within our power to keep any
information submitted by our customers as secure as we possibly can.

Please select the products and/or enter the number of units required. On JavaScript-enabled browsers the display table will be automatically updated. Such display is for information only and is not essential for the operation. You can select any number of items prior to adding to the shopping cart. It is not necessary to add each item to the cart as they are selected. However, if the products are in the form of a simple or dropdown list, and JavaScript is NOT enabled, then you must add each item to the cart individually.

Current Selection
The following information is generated automatically for display only. Tax and delivery may be changed.
Total value ($) Choose Tax rate(%)
 
Sub total ($)
 

Contact C.G. Edwards
Contact C.G. Edwards

garbutton.gif - 3038 Bytes
Return to Garelick Index

hpbutton.jpg - 1591 Bytes
Return to C.G. Edwards Homepage


This page updated October 15, 2009

All Images and logo's on this website are copyrighted and may not be reproduced without permission